Description
Cross Hole Countersinks For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. The intersection of the hole and cone form the cutting edge on the tool. The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates. If this does not occur the cutting edge will lack clearance and rub rather than bite into the material. This clearance is referred to as cutting relief. The radially relieved single cutting edge provides fast stock removal with low vibration for chatter-free operation ensuring the smoothest finish. These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons. They also may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw. Includes 8032-15 – Saber 15mm 90 Degree TiN Coated HSS-Co5 (Cobalt) Cross Hole Countersink 8032-21 – Saber 21mm 90 Degree TiN Coated HSS-Co5 (Cobalt) Cross Hole Countersink 8032-28 – Saber 28mm 90 Degree TiN Coated HSS-Co5 (Cobalt) Cross Hole Countersink
